![]() ![]() (same as the “Local_subnets” was taken in Step# 14) Then type Local_Subnets in the box next to it. Source: Select “Single host or alias”.Step # 22: Enter the following information. Click on the Disable icon next to the IPv6 rule. Step # 20: Repeat steps # 18 and 19 for all your WAN connections, i.e make copies of the other WAN connections one by one and change their interface to FastestVPN. Here you need to change the “Interface” field to “ FastestVPN” as shown in the screenshot. Step # 19: A new page will appear for your copied WAN connection. First, click on the “copy” icon next to the first WAN connection. Here you’ll make copies of all the WAN connections one by one. Step # 18: Scroll down to the mapping section. Step # 17: Select the “Mode” as Manual and click Save and Apply Changes. Step # 16: Click Firewall > NAT > Outbound. Network or FQDN: Enter 192.168.3.0 in the first box and 24 in the second box as shown in the screenshot.Step # 15: Provide the following information. Step # 14: Click Firewall > Aliases > IP and then click Add. Do not make any other changes and click Save and Apply changes.Name: Give it a name such as “FastestVPNOpenVPN”.Interface: Select the interface that you created in step # 11, which is “ FastestVPN” in this example.Step # 13: Enter the following information. Step # 12: Click System > Routing and then click Add. Do not change the other fields and click Save and Apply Changes.Description: Any name for the interface such as FastestVPN.Step # 11: Provide the following information. Step # 10: Click on the Add button next to the FastestVPN client that you just created, which is “ ovpnc1 (FastestVPNovpn)” in our example. ![]() Step # 9: Click the I nterface tab and click Assignments.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |